Sharp MX-M200D Service Manual page 46

Main Sub
code code
24 08 Copy counter clear
Used to clear the copy counter.
Sim24-8 COUNTER CLR
COPIES COUNTER
CLEAR
AER YOU SURE? EXEC
[OK] key or [START] key: Clears the copy counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
09 Printer counter clear
Used to clear the printer counter and other counters.
Select a counter to be cleared and press [OK] key or [START] key. The confirmation window is displayed.
Press [OK] key or [START] key again, and the specified counter is cleared and the machine returns to the
initial window.
Numeric key input
Sim24-9 COUNTER CLR
1:PRINT
2:OTHER
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
13 Scanner counter clear
Used to clear the scanner counter.
Sim24-13 COUNTER CLR
SCAN COUNTER
CLEAR
AER YOU SURE? EXEC
[OK] key or [START] key: Clears the scanner counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
14 SPF/RSPF jam total counter clear
Used to clear the SPF/RSPF jam total counter.
Sim24-14 COUNTER CLR
SPF JAM COUNTER
CLEAR
AER YOU SURE? EXEC
[OK] key or [START] key: Clears the SPF/RSPF jam total counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
15 Scanner mode counter clear
Used to clear the scanner mode counter.
Sim24-15 COUNTER CLR
SCANNER MODE
COUNTER CLEAR
AER YOU SURE? EXEC
[OK] key or [START] key: Clears the scanner mode counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[INTERRUPT] key: Shifts to the sub code input window.
Contents
Sim24-9 COUNTER CLR
[OK] key or
1:PRINT
[START] key
2:OTHER
1 ARE YOU SURE?
[BACK] key
[OK] key or [START] key (Counter clear)
MX-M200D SIMULATIONS 7-17
1
Remark
(Only when the
SPF/RSPF is
installed.)