Tune; Transpose; Tempo - Kurzweil PC3LE6 Musician's Manual

Master Mode
Master Mode Page 1 (MAST 1)

Tune

Adjusting the value of this parameter tunes every program in the PC3LE by the amount you
specify. Tuning can be adjusted up or down 100 cents (one semitone) in one-cent increments.
This parameter is useful for getting in tune with recordings and acoustic instruments. Adjusting
the tuning in Master mode does not change the settings on the PITCH page of individual
programs, but will be added to any adjustments you make there. Master mode tuning
adjustments affect only the audio output of PC3LE program notes, and not notes sent via MIDI.

Transpose

Like the Tune parameter above, Transpose affects every PC3LE program, but not those notes
sent to the MIDI Out port. You can adjust the MIDI transposition sent to the MIDI Out port on
the TRANSMIT page in MIDI mode.

Tempo

When the Clock Source parameter is set to Internal, the Tempo parameter sets the PC3LE's
system tempo. The system tempo sets the tempo for all modes except Setup Mode, which has its
own tempo settings. Also, in Song mode, changing to a new song will override the system
tempo. The Tempo parameter values are in units of BPM (beats per minute). You can also use the
Tap Tempo button to set the system tempo from other modes (see Tap Tempo Button on page 6-4.)
9-2