Kurzweil PC3LE6 Musician's Manual page 71

Nevertheless, there will be occasions when "stacking" zones on the same MIDI channel might
come in handy. Suppose you want a physical controller on the PC3LE to send data for two
different numbered MIDI Controllers on the same channel. In this case, you must create two zones
assigned to the same channel, but with different controller assignments.
Here's one example: if a receiving synth is using Controller 1 for modulation depth and
Controller #13 for modulation speed, you can increase both the depth and the speed with
Knob A. Start by assigning Knob A in Zone 1 to MWheel and in Zone 2 to MIDI 13; then assign
both zones to the same MIDI channel. (You may want to make sure you aren't sending doubled
notes. Use the Note Map parameter on the KEY/VEL page to set one zone's Note Map to Linear
and the other zone's Note Map to Off.)
Another example: create two or more zones that are identical except for their transposition
settings. Now you can play parallel intervals (or chords) with single keystrikes.
MidiBank
The PC3LE's programs are divided into 17 MIDI Banks, numbered 0–16. Program 46 in MIDI
Bank 3 for example, is 430 Lead Oboe. The MIDI Bank parameter displays which bank the
current program is assigned to, and automatically changes to match the Program value you set.
You can send Bank Select messages to external MIDI devices as well, by setting the Destination
parameter to a destination including MIDI or USB_MIDI, then changing MidiBank. Some
instruments may have more banks than the PC3LE. Bank switching via MIDI makes it easy for
the PC3LE user to select sounds on external instruments, no matter how many banks they might
have.
When you change the value of the Program parameter, the value of MidiBank automatically
changes correspondingly. If you want to transmit a MIDI Bank number different from the one
corresponding to the local program, select the local program first, then change the MIDI bank.
If you select an empty bank (like Bank 53), the zone will still produce sound on the PC3LE,
provided that Destination is set to a destination including Local. The Program parameter will
display whatever internal program you set, but the bank number transmitted over the MIDI Out
port will be different from the internal program's bank number.
MIDI Program (MidiProg)
MidiProg defines which program number is transmitted out the MIDI Out port on the current
zone's MIDI channel.
When you change the value of the Program parameter, the value of MIDIProg automatically
changes correspondingly. If you want to transmit a MIDI program change number different
from the one corresponding to the local program, select the local program first, then change the
MIDI program.
Different programs are accessible depending on the value of the BankMode parameter:
Value of BankMode
Ctl 0 or Ctl 32
Ctl 0/32
K2600
None
Available Programs
0 to 127
0 to 127
0 to 99
None
Setup Mode
The Setup Editor
7-7