Chapter 11 Master Mode; The Master Mode Page; Tune - Kurzweil PC3 Getting Started Manual

Chapter 11
Master Mode
Press the Master mode button to enter Master mode, which contains parameters affecting the
PC3's overall performance.

The Master Mode Page

On the Master mode page you'll find parameters for setting the overall tuning and transposition
of the PC3, sampling rate for digital output, and for several keyboard and programming
adjustments.
Parameter

Tune

Transpose
Velocity Touch
Pressure Touch
Intonation
IntonaKey
Digital Out Mode
General MIDI
Numeric Entry
Tune
Adjusting the value of this parameter tunes every program in the PC3 by the amount you
specify. Tuning can be adjusted up or down 100 cents (one semitone) in one-cent increments.
This parameter is useful for getting in tune with recordings and acoustic instruments. Adjusting
the tuning in Master mode does not change the settings on the PITCH page of individual
programs, but will be added to any adjustments you make there. Master mode tuning
adjustments affect only the PC3's notes, and not notes sent via MIDI.
Preliminary - Subject to Change
Range of Values
± 100 cents
± 60 semitones
Velocity Map list
Pressure Map list
Intonation Table list
C–B
Muted, 44.1 KHz – 192 KHz, Ext
On, Off
Global, Bank
Master Mode
The Master Mode Page
Default
0
0
1 Linear
1 Linear
1 Equal
C
44.1 KHz
Off
Global
11-1