Function Menu; Tune; Split Point - Kurzweil KP-100 User Manual

Function Menu

Press and hold the [SHIFT] button and then press the [FUNCTION]
button to enter function menu. The LCD displays the current function
menu option. Use [+/YES]/ [-/NO] button or the data dial to adjust the
parameter of the current option.
The option and parameters are as follows:
NO. Content LCD display
1

Tune

xxx Tune
2

Split Point

xxx Split pt
3 Beat Type xxx Beat
4 Pedal Type xxx Ped XXX
5 EQ Type xxx EQ XXX
6 Reverb Type xxx RevHall1
7 Reverb Level xxx Rev Lev
8 Chorus Type xxx ChrGMCr2
9 Chorus Level xxx Chr Lev
xxx HrmDuet
10 Harmony Types
11 MIDI Receive xxx Midi In
12 xxx Midi Out
MIDI Transmit
13 Auto Power Off xxx PowerOff
Note:
It will exit the function menu if there is no operation in 5 seconds.
Tune
This function sets the pitch of entire keyboard in 2-cent increments.
1.
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select the tune menu. The LCD displays
"xxx Tune".
Use [+/YES]/ [-/NO] button or data dial to change tune value. Its
range is from -50 to 50 cents.
2.
Press [+/YES] and [-/NO] buttons simultaneously will set the tune
value to its default setting: 0.
The setting applies to both accompaniment and the voice.
Split Point
This function sets the point which separates the entire keyboard to
two sections. The left hand section controls the auto bass chord
accompaniment when the A.B.C. function is on, or it plays the lower
voices when the A.B.C. function is off.
1.
Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select split point menu. The LCD displays
"xxx Split Pt". Use [+/YES]/ [-/NO] button or data dial to change
Split Point. The range of Split Point is: 1~61.
2.
Press [+/YES] and [-/NO] buttons simultaneously will set the split
point to its default setting.
Note:
The Split Point belongs to the left hand area.
16
Range
-50 ~ +50
1-61
0, 2-9
Ped Sust, Ped Soft, Ped Mem, Ped St/S
EQ Pop, EQ Rock, EQ Class,
EQ Jazz, EQ Dance, EQ Reset
RevRoom1, RevRoom2, RevRoom3,
RevHall1, RevHall2, RevHall3, RevChrh1,
RevChrh2, RevDelay, RevPnDly
0-32
ChrChrs1, ChrChrs2, ChrGMCr1, ChrGMCr2,
ChrFlgr1, ChrFlgr2, ChrRtry1, ChrRtry2
0-32
HrmDuet, HrmStdTri, HrmFulCd, HrmRkDut, HrmCtDut,
HrmCtTri, HrmBlock, Hrm4Cls1, Hrm4Cls2, Hrm4Open,
Hrm1+5, HrmOctv1, HrmOctv2, HrmStrum
01-16, ALL
01-16
30, 60, OFF
SHIFT
PIANO
FUNCTION
Default
0
19
4
Ped Sust
EQ Reset
RevHall1
20
ChrGMCr2
0
HrmDuet
ALL
01
30
SHIFT
PIANO
FUNCTION
SHIFT PIANO
FUNCTION