Kurzweil PC3LE6 Musician's Manual page 260

Tutorials: Setup Mode
Basics Of Using Riffs
4.
5.
6.
13-42
From the CH/PROG page of the setup editor, press the left hand more soft button to cycle through
the soft buttons at the bottom of the display and find the NewZn soft button. Press the NewZn soft
button. This will create a new zone (zone 5) and bring you to the CH/PROG page for the new zone
(see below.) You can see the number of the currently selected zone in the top right corner of the
display. (If needed, change the selected zone by using the Chan/Zone buttons to the left of the
display.)
We will use the new zone (zone 5) to play a horn riff. On the CH/PROG page for zone 5, choose
program 59 BigBand/AMradio for the zone's program (see below.) To do this, enter 59 into the
Program field by pressing and lighting the Category Shift button, then use the alphanumeric pad to
enter 59 followed by the Enter button. You can also use the Alpha Wheel or - / + buttons to select
the program. (You can always go back and change the program later.)
Next, use one of the more soft buttons in the bottom corners of the display to cycle through the soft
buttons at the bottom of the display and find the RIFF1 soft button. Press the RIFF1 soft button.
This will bring you to the RIFF1 page for zone 5 (see below.)