Split/Layer Button - Kurzweil PC3LE6 Musician's Manual

Setup Mode

Split/Layer Button

MIDI Bank Select messages, Pan and Volume messages, and entry values for physical controllers
(entry values are the values that take effect as soon as you select the setup; there are also
controller exit values, which are the values of the controllers when you leave the setup—either
by selecting another setup or by exiting Setup mode). The values of all these messages depend
on the parameters you define in the Setup Editor for each setup.
In addition to zone splitting and layering, Setup mode is a powerful way to take advantage of
the PC3LE's assignable knobs, switches, pads, and other controllers.
Split/Layer Button
Press the Split/Layer button (on the front panel, below the Mode buttons) to add a split or layer
zone to the currently selected setup. You will be brought to the Split/Layer page:
Press the LoSplt or UpSplt soft button to add a new zone to the lower or upper half of the
keyboard, or press the Layer soft button to add a layered zone. Using the Split/Layer button
automatically creates and edits a new setup for you, which is convenient for making basic split
and layered programs. For more complex splits and layers, it may be necessary to use the setup
editor, see The Setup Editor on page 7-5, and Chapter 13, Tutorials: Setup Mode for details.
Adding a Split Zone
On the Split/Layer page, press the LoSplt or UpSplt soft button to add a new zone to the lower
or upper half of the keyboard, you will be brought to the Split/Layer: LOWERSPLIT or
UPPERSPLIT page. Both pages have the same parameters to set. Play the keyboard as you
adjust these parameters to find the right settings. Below is the Split/Layer: LOWERSPLIT page:
7-2