Channel; Transpose - Kurzweil PC3LE6 Musician's Manual

Master Mode
MIDI Transmit (XMIT)
through the traditional MIDI port. Both parameters, MIDI Transmit Destination and the setup
Destination parameter in the SetupMode:CH/PRG page act as filters and both are active in
Setup mode.
Note: This parameter has no effect on Song mode. In Song mode each track's destination ignores this
parameter.

Channel

This defines which MIDI channel the PC3LE uses to transmit MIDI messages when not using a
setup or Song mode (each zone determines this in a setup, each track determines this in a song.)
The value for this parameter matches the current MIDI channel displayed on the top line of the
Program mode page. If you change the current MIDI channel while in Program mode, the
setting of this parameter changes accordingly, and vice versa.

Transpose

This parameter affects the transposition that's applied to the MIDI data stream. Adjusting this
parameter transposes the PC3LE's notes, as well as notes on slaves receiving from the PC3LE.
This transposition setting mirrors transposition settings from the Program and Setup main
pages. It's value is added to transposition settings made elsewhere. This parameter has no effect
on MIDI data sent from Song mode.
9-12