Touch; Tune; Midi Channel - Kurzweil MPS20 User Manual

Touch

Use this parameter to adjust the keyboard touch sensitivity to your playing technique. See the
chart below for the available settings.
Linear
Light 1
Light 2
Light 3
Hard 1
Hard 2
Hard 3
Piano Touch
Easy Touch
GM Receive
Default Setting: Linear
Range: (see chart above)
Reset: [Value Jump] button pair

Tune

This parameter allows you to adjust the tuning. You can easily tune the MPS20 to other
instruments or recordings.
Default Setting: 0, A-440
Range: -100 to 100 cents
Reset: [Value Jump] button pair

MIDI Channel

This parameter controls the MIDI transmit channel used for Voice Mode. You can select
Channels 1 through 9 and Channels 11 through 15. Channel 10 is reserved for rhythm playback
and Channel 16 for the metronome. (See Chapter 11, MIDI, beginning on page 40.)
Default Setting: Channel 1
Range: Channels 1
Reset: [Value Jump] button pair
Best dynamic range for all instruments.
For players with a light touch. Adjust this
parameter to achieve a good dynamic range.
These settings are from Light 1, a slightly light
touch to Light 3, a very light touch.
For players with a heavier touch. Adjust this
parameter to achieve a good dynamic range.
These settings are from Hard 1, a slightly harder
touch to Hard 3, a very hard touch.
Best for piano dynamics.
Light touch, especially for younger players.
Select this when playing General MIDI songs.
9 and Channels 11—15
—
33
Function Mode