Soft Buttons In Master Mode; Reset; Delete - Kurzweil PC3LE6 Musician's Manual

Master Mode

Soft Buttons In Master Mode

If your PC3LE is already in the bank you want to use (group of 128 programs starting from 0,)
you can send it single PCHs (standard program change commands) from 0 to 127, to select
programs within that bank. The PC3LE's response depends on the setting for the Bank/Select
parameter on the Receive (RECV) page in Master mode. If you want to change the bank of
available programs, the PC3LE must receive either an MC (MIDI controller) 0 or 32 message
with value 0–127. The next PCH in the range 0–127 will select the correspondingly numbered
program in the newly selected bank. The following table of examples should help make it clear.
Bank Change
Command Received
MC 0 or 32: value 0
MC 0 or 32: value 1
MC 0 or 32: value 2
Soft Buttons In Master Mode

Reset

Press the Reset soft button if you want to return your PC3LE's memory to the state it was in
when you bought it.
CAUTION: Resetting the PC3LE system causes ALL parameters to be restored to default values and
ALL user objects to be erased.

Delete

Press the Delete soft button to delete the master table, which stores all settings on the Master
Mode pages, program settings for each MIDI channel and program category favorites for
Program Mode, and replacement General MIDI programs in Program Mode when the PC3LE is
in General MIDI Mode. Master Mode parameters will be returned to their factory default
settings.
9-22
Program Change
Result
Command Received
PCH: value 99 Program 98 (bank 1, 98th program)
PCH: value 41 Program 168 (bank 2, 41st program)
PCH: value 56 Program 311 (bank 3, 56th program)