Panasonic Strata Se General Description Manual page 87

Start Time "C" is the stop time for "8"
Start Time "A" is the stop time for "C"
2) Select the priority class required (Programs
l#X51 - 53). Enter the route group
numbers (1 - 4) required (refer to Program
1#8XY).
NOTE.
If a table is to be used 24 hours a day, the
Schedule B Start Time must be the same as
Schedule A Start Time.
l#X60 -
63 Program- LCR Route Table,
Start Time 6 Schedule
This program will define the stop time for
a previousiy selected start time and/or the start
time for another period.
0 The procedure is the same~as in Program
l#X50 - 53.
l#X70 -
73 Program- LCR Route Table,
Start Time C Schedule
l
The information and procedure are the same
as Program l#X50 - 53.
1#9XY Program- Modified Digits Table (X =
Modified Digits Table 1 - 6) [Y = Delete Digits
(0), Add Digits
(1
)]
1) Delete digits = 0 - 10. Add digits = 0 - 22.
NOTES.
1. The quantity of digits that will be deleted
from the digits dialed (deletion starts with
the first digit).
2.
A maxi,mum of 22 digits may be added to
the digits dialed via these tables. Pauses
may also be inserted between digits
added by depressing the appropriate keys
-
(00 - 08) when the pause is required (a
pause is counted as two digits).
3. Enter pauses in 2-second increments: 2 -
16.
2) Enter the modified digits in the appropriate
tables.
2#XY Program- LCR Area/Office Code Ex-
ception Table (X = Area/Office Code Excep-
tion Table 1 - 8) [Y = Route Table Number
(O), Area Code (1). Office Code Allowed (2).
Office Code Delete (3), Office Code Display
(411
This table defines the route table that office
-11
PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
codes in a specified area code will use.
1) Enter Area/Office Code Table number (1 -
8).
2) Enter the Route Table number required (1 -
8).
3) Enter the Area Code required.
4) Enter the Office Codes allowed.
5) Enter the Office Codes deleted.
6) Allowed Office Codes may be displayed.
03.50 Station Assignments
3XX Program-Station CO Line Access
The ability of an individual station to access
any of the CO lines is determined by selections
made using this program. A station denied ac-
cess to a CO line by this program does not have
key or LED functions for that CO line and cannot
seize that line by dialing an access code.
l
Selections must be repeated for all stations-
-mark an X next to each CO key/LED that
is to be accessed by the station in question.
3#XX Program- HOXB, HMDB and HI06 Mo-
dule Enable
Seven choices are enabled by this program..
1) Mark an X next to 07 if voice mail is con-
nected to the HIOB. Leave blank if voice mail
is not connected.
2) Mark an X next to CC 1: tha telephone or de-
vice connected to ,the HI06 is to use DTMF
dialing. Leave blank if dialing is to be from
rotary device (telephone).
3) Mark an X next to 04 if this station is to be
a modem phone (HMDB). Leave blank if not
equipped.
4) Mark an X next to 03 if this station is to be
an HIOB module. Leave blank if not equip-
ped.
5) Mark an X next to 02 if the unused OPX sta-
tion is to show busy. Leave blank if it is not
to show busy.
6) Mark an X next to 01 if an HOXB is con-
nected to the station. Leave blank if the sta-
tion is not equipped with an HOXB.