Panasonic Strata Se General Description Manual page 124

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 22
PROGRAM 0#9
OFF-PREMISES LINE HUNTING
SET LED on.
1) Lock in the
SET
switch on the HKSU.
2) Depress the Lm key on station 13/l 7.
3) Dial a$ a on the dial pad.
Station 13/17 LED 19 on.
System is in program mode.
Normal functions halt on station 13/17.
SPKR LED steady on.
SPKR LED flashes continuously.
CO LEDs indicate present data.
4) Refer to the System Record Sheet.
An X on the record sheet means the LED should
Using using the appropriate keys, turn their be on.
associated LEDs on or off, as required.
If the LED is already on, depressing the associated
l
LED OFF: (DAY and NIGHT mode) Hunt key will turn it off and vice versa. LEDs may be
rings with LINE1 /TEL1 only.
turned off and on until the desired pattern is set.
0 LED ON (DAY mode): Hunt does not ring
with any LINESTELS.
l
LED ON (NIGHT mode): Hunt rings with
ALL
LINEWTELS.
5) Depress the m key to place new data in
All station 13/17 LEDs (except 19) go off.
memory.
6A) Go to Step 2 in another program table
. . or . . .
613) Transfer data into working memory per Par-
agraph 02.06. SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
-48-