Panasonic Strata Se General Description Manual page 133

TABLE 31
PROGRAM 1X0
TOLL RESTRICTION CLASS PARAMETERS
( SET LED on.
1) Lock in the
SET
switch on the HKSU.
Station 13/17 LED 19 on.
System is in program mode.
2) Depress the m key on station 13/l 7.
Normal functions halt on station 13/l 7.
SPKR LED steady on.
3) Dial aa 1 on the dial pad.
4) Refer to the System Record Sheet.
Using the various keys, turn their associated
LEDs on or off, as required. The detailed
meaning of each key/LED is shown below.
NOTE.
If any key/LED is not shown,.it is not used.
SPKR LED flashes continuously.
An LED indicates present data.
An X on the record sheet means the LED shoulc
be on.
If the LED is already on, depressing the associatec
key will turn it off and vice versa. LEDs may be
turned off and on until the desired pattern is set.
PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
KEY/LED
LED ON
LED OFF
02
Area
code f 555 + XXXX-Allowed Not Allowed
01
01 or 01 1 Overseas Restricted Allowed
00 0 + Restricted Allowed
5) Depress the m key to place new data in
All station 13/l 7 LEDs (except 19) go off.
memory.
6A) Go.to Step 2 in another program table
. . . or . . .
66) Transfer data into working memory per Par-
agraph 02.06.
SET LED goes off.
Station 13/17 LED 19 goes off.
New data is stored, previous data is erased.
-57-