Panasonic Strata Se General Description Manual page 160

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 58
PROGRAM 81XX - 89XX
CO RINGING ASSIGNMENTS (DAY/DAYZ/NIGHT)
1) Lock in the
SET
switch on the HKSU.
2) Depress the em key on station 13/17.
3) Dial 3aafl on the dial pad (Y = 1 - 9"; XX =
the number of station(s) to
be
programmed).
4) RefeF to the System Record Sheet.
Using the appropriate keys, turn their asso-
ciated LEDs on or off, as required.
l
LED ON = Ringing assigned.
l
Each CO key/LED represents itself-that
is, if LED 01 is on, then the station being
programmed (XX) is allowed access to
CO1 , etc.
5) Depress the m key to place new data in
memorv.
6A) Return to Step 2 in order to continue with
this program
6B) Go to Step 2 in'an:ther program table
. . or . .
6C) Transfer data into working memory per Par-
agraph 02.06.
SET LED on.
Station 13/l 7 LED 19 on.
System is in progra'm mode.
Normal functions halt on station 13/17.
SPKR LED
steady
on.
SPKR LED flashes continuously.
CO LEDs indicate present data.
An X on the record sheet means the LED sho(
be on.
If the LED is already on, depressing its associat
key will turn it off and vice versa. LEDs may
turned off and on until the desired pattern is s
All station 13/l 7 LEDs (except 19) go off.
SET LED goes off.
Station 13/17 LED 19 goes off.
New data is stored, previous data is erased.
l l = DAY-immediate
2 = DAY-l 2-seconds delay
3 = DAY--24~seconds delay
NOTE:
4 = DAY 2-immediate
7 = NIGHT-immediate
5 = DAY 2-l 2-seconds delay
8 = NIGHT-l 2-seconds delay
6
= DAY 2-24-seconds delay
9 = NIGHT-24-seconds delay
For multiple station programming, refer to Paragraph
02.10.