Panasonic Strata Se General Description Manual page 164

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 62
PROGRAM #lXX*YY
AUTOMATIC DIALING PROGRAMMING FROM STATION 17
(Requires LCD EKT)
~I
SET LED on.
1) Lock in the
SET
switch on the HKSU.
Station 13/l 7 LED 19 on.
System is in program mode.
Normal functions halt on station 13/l 7
LCD: PROGRAM MODE
2) Depress the m key on station 13/l 7.
SPKR LED steady on.
LCD: PROGRAM NO.?.
3) Dial jpfla on the dial pad.
LCD: (displays dialed digits)
XX = the number of the station(s) to be pro-
grammed (XX must = 10 for System Auto
Dial).
4) Depress the P key.
5) Refer to the System Record Sheet.
Dial W (Y'f = Auto dial code: 10 - 49, per-
sonal; 60 - 99, system).
6) Depress the auto dial digits (insert pauses via
key
q
and flashes via key
q
.
7) Depress the m key to place new data in
memorv.
LCD: (displays dialed digits)
LCD: (displays dialed digits)
DATA =
8A) Return to Step 2 in order to continue with
this program
86) Go to Step 2 in'an:ther program table
. . . or . .
8C) Transfer data into working memory per Par-
agraph 02.06.
LCD: (displays dialed digits)
All station 13/l 7 LEDs (except 19) go off.
LCD: DATA PROGRAMMED
B
SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
-88-