Panasonic Strata Se General Description Manual page 18

STRATA Se/'&
GENERAL DESCRIPTION
NOVEMBER 1987
DTMF and Dial Pulse CO Line Compatible:
The system will interface with either DTMF
or rotary-dial pulse CO lines on a line-by-line
basis as determined by system programming.
External Page Interface: A 600-ohm connec-
tion point is provided for a customer-provided
external amplifier/speaker. An SEPU PCB
(see External Amplified Speaker and External
Page Amplifier) is mounted in the key service
unit when a customer-provided external
speaker only is used; the output impedance
is 8 ohms. This page circuit can be accessed
as part of the All Call Voice Page feature.
F!exible Intercom Numbering: A station inter-
com number can be flexibly programmed up
to any 4-digit number. It is, therefore, possible
to match a station's intercom and CTX line ex-
tension number.
Flexible Key Assignment: Allows each phone
to be programmed for the optimum use of its
CO or feature buttons.
Flexible Line Ringing Assignment: A program-
mable ring or no ring option is provided for
each line selectively by each station.
Forced Account Code: Requires selected sta-
tion(s) to dial an account code prior to dialing
a number. The account code is recorded with
call details on the SMDR report.
Group Paging: Special 2-digit access codes
(81, 82, 83 or 84) permit voice paging to one
of four zones. Zone assignment is via $oft-
ware and is totally flexible. Paging is via the
speakers of idle telephones.
Least Cost Routing: Enables the customer to
decide over which trunks outgoing voice and
data calls will be routed. This can greatly re-
duce the cost of long distance calling. Four
classes of LCR can be programmed to give
priority routes to .the users who need them.
(STRATA Vle only.)
Live System Programming: Live system pro-
gramming is accomplished without service in-
terruption to other station users by placing
the system in the special programming mode
and inputting
data via
station 17 (station 13
in STRATA Se). Station 17(13) is the only sta-
tion that is "down" during programming.
-16-
Message Waiting: Any station (including the
designated Message Center) can set a Mes-
sage Waiting LED at any station with the Mes-
sage Waiting LED of that station. The called
station cancels the LED by lifting the handset
and depressing the m button (not avail-
able on single-line electronic telephone). See
Flash Button.
MF Signal Time (160/80 ms): The standard
MF dial signal time is 80 milliseconds, but it
may be extended to 160 milliseconds, if re-
quired by the Central Office or to activate re-
mote equipment.
Multiple Simultaneous Handsfree Intercom
Paths: Two intercom paths are standard in
the systems. Both intercom lines are able to
carry handsfree conversations simultane-
ously. (STRATA Vle may be increased to four
paths optionally.)
Music-On-Hold Interface: An interface is in-
cluded for a customer-provided music source.
CO lines placed on hold will be connected to
this source. In addition, this music may also
be broadcast from electronic telephone speak-
ers and external page when the background
music programming options are selected.
Night Ringing Answer Code: A night ringing
call may be answered from any station via a.
dial code.
Night Ringing Over External Page: As a prd-
grammable option, while the night mode is ac-
tive, a system-generated ring tone will be
transmitted via the external speaker when-
ever any line rings (STRATA We only).
Night Transfer: On a programmable optional ba-
sis, the system can function with two or three
ringing patterns. If three patterns are se-
lected, they are designated DAY, DAY 2, and
NIGHT. If the two-pattern mode is selected,
DAY and NIGHT designations are used. In
both cases, the ringing modes are selected
with the
q
button on station 10.
Non-blocking Dialing: Dialing is permitted on
intercom and all CO lines simultaneously.
Outgoing Call Restriction: Any station can be
selectively restricted from originating calls on
any or all CO lines. However, the station may
still receive calls on the restricted line(s).