Panasonic Strata Se General Description Manual page 161

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 59
PROGRAM 9#XX
DOOR PHONE ASSIGNtiENTS
SET LED on.
1) Lock in the
SET
switch on the HKSU.
Station 13/17 LED 19 on.
System is in program mode.
Normal functions halt on station 13/l 7.
2) Depress the m key on station 13/l 7.
SPKR LED steady on.
3) Dial ~~~~ on the dial pad (XX = the number
SPKR LED flashes continuously.
of the station(s) to be programmed). CO LEDs indicate present data.
4!
Refer to the System Record Sheet.
An X on the record sheet means the LED shoulc
Using the appropriate keys, turn their ass+
be on.
ciated LEDs on or off, as required. If the LED is already on, depressing its associatec
l
LED ON
q
Access allowed. key will turn it off and vice versa. LEDs may be
l
Each CO key/LED represents itself-that
turned off and on until the desired pattern is set
is, if LED 01 is on, then the station being
programmed (XX) is allowed access to
CO1 , etc.
5) Depress the m key to place new data in
All station 13/l 7 LEDs (except 19) go off.
memory.
6A) Return to Step 2 in order to continue with
this program
or . .
66) Go to Step 2 in'another program table
. . or . . .
6C) Transfer data into working memory per Par- .
agraph 02.06.
SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
For /;nultiple station programming, refer to Paragraph 02.10.
-85-