Panasonic Strata Se General Description Manual page 135

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 33
PROGRAM 1XZ
TOLL RESTRICTION CLASS OFFICE CODE ENTRY
(LCD TELEPHONE REdRED)
SET LED on.
1) Lock in the SET switch on the HKSU.
Station 13/17 LED 19 on.
System is in program mode.
Normal functions halt on station 13/l 7.
LCD is blank.
2) Depress the m key on station 13/l 7.
SPKR LED steady on.
LCD is blank.
3) Dial OUj (Allow), OIa(Deny) or ~~~(Display) SPKR LED flashes continuously.
as required. (X = Restriction class 1 - 4.)
,
--
LCD disp!ays dialed number.
1 X 6 = LCD is blank.
4) Press g k'ey. 1 X 7 = LCD is blank.
1 X 8 = LCD displays all allowed codes.
LCD displays code entered.
5) Enter first office code in range sequence
(start).
6) Deoress P kev:*
7) Enter final office code in range sequence
(stop).*
8) Depress 3 key.
9) Return to Step 5 to enter additional office
codes.
10) Depress the m key to place new data in
memory.
1 1A) Return to Step 2 in order to continue with
this program
. . . or . . .
116) Go to Step 2 in another program table
. . . or . . .
11C) Transfer data into working memory per
1 Paragraph 02.06.
LCD shifts left to provide space for next code.
LCD displays code entered.
LCD is blank.
All station 13/l 7 LEDs (except 19) go off.
SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
"Skip Steps 6 and 7 if only one office code in sequence is being entered.
-59-