Table of Contents
Advertisement
PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 48
PROGRAM
2#XY
LEAST COST ROUTING AREA/OFFICE
CODE EXCEPTION
TABLE
(LCD EKT REQUIRED-STRATA
Vie only)
I) Lock in the SET switch
on the HKSU.
SET LED on.
Station
17 LED 19 on.
Normal
functions
halt on station
17.
LCD: PROGRAM
MODE
2) Depress
the m
key on station
17.
SPKR LED steady on.
LCD: PROGRAM
NO.?
3) Dial 3113 1 on the dial pad. X = Area/Office
SPKR LED & LED 10 flash continuously.
Code Table 1 - 8.
4) Refer to System
Record Sheet.
Enter Route Table number
(1 - 8).
5) Depress
the m
key.
LCD: (displays table number)
5) Depress
the lm
key on station
17.
SPKR LED steady on.
LCD: PROGRAM
NO.?
7) Dial 5 11 i] on the dial pad. X = Area/Office
LCD: (displays
dialed number)
then . . .
Code Table 1 - 8.
DATA =
3) Enter Area Code via the dial pad.
LCD: (displays
area code entered)
3) Depress
the m
key.
10) Depress
the m
key.
SPKR LED steady on.
LCD: PROGRAM
NO.?
1 1) Dial iiai(Add),
ajna(Delete),
or ~p~~(Dis-
SPKR LED flashes
continuously.
play). X = Area/Office
Code Table 1 - 8.
LCD: (displays
dialed number)
2 # X 2 LCD: DATA =
12) Depress i key.
2 # X 3 LCD: DATA =
2 # X 4 LCD: (displays
all currently
programmed
off ice codes)
13) Enter
first Area
Code
in range
sequence
LCD: (displays
code entered)
(start).
14) Depress 1 key.*
LCD: (shifts left to provide
space for next code)
15) Enter
final
Area
Code in range
sequence
LCD: (displays code entered)
(stop)."
16) Depress
3 key.
17) Return
to Step 10 to enter additional
Area
Codes.
18) Depress
the m
key to place new data in
All station
17 LEDs (except
19) go off.
memory.
19A) Go to step 2 in, another
program
table
. . . or . . .
196) Transfer data into working
memory
per Par-
agraph
02.06.
SET LED goes off.
Station.
17 LED 19 goes off.
New data is stored, previous
data is erased.
"Skip Steps
14 and 15 if only one area code in sequence
is being entered.
-74-
Advertisement
Chapters
Table of Contents
