Panasonic Strata Se General Description Manual page 125

PROGRAMMING PROCEDURES
SECTION 500-036-300
JANUARY 1988
TABLE 23
PROGRAM 190
PBX BACKUP
SET LED on.
1) Lock in the
SET
switch on the HKSU.
Station 13/l 7 LED 19 on.
'
System is in program mode.
2) Depress the m key on station 13/l 7.
3) Dial 031 on the dial pad.
Normal functions halt on station 13/l 7.
SPKR LED steady on.
SPKR LED flashes continuously.
CO LEDs indicate present data.
4) Refer to the System Record Sheet.
An X on the record sheet means the LED should
Using the appropriate keys, turn their asso-
be on.
ciated LEDs on or off, as required. Each CO If the LED is already on, depressing the associated
key/LED represents itself-that is, if LED 01 key will turn it off and vice versa. LEDs may be
is on, the system assumes-that the CO1 line turned off and on until the desired pattern is set.
is connected to a PBX line and will cause fea-
tures such as Toll Restriction and Automatic
Dialing to function accordingly, etc.
5) Depress the m key to place new data in
All station 13117 LEDs (except 19) go off.
memory.
6A) Go to Step 2 in another program table
. or . .
6B) Transfer data into working memory per Par-
agraph 02.06.
SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
-49-