Panasonic Strata Se General Description Manual page 159

PROGRAMMING PdOCEDURES
SECTION 500-036-300
JANUARY
1988
TABLE 57
PROGRAM 7XX
STATION OUTGOING CALL RESTRICTION
SET LED on.
1) Lock in the
SET
switch on the HKSU.
Station 13117 LED 19 on. ,
System is in program mode.
Normal functions halt on station 13/17.
2) Depress the m key on station 13/l 7.
SPKR LED steady on.
3) Dial Gaa on the dial pad (XX = the number of
SPKR LED flashes continuously.
the station(s) to be programmed).
CO LEDs indicate present data.
4) Refer to the System Record Sheet.
An X on the record sheet means the LED should
Using the approcriato keys, turn their asso-
be on.
ciated LEDs on or off, as required.
If the LED is already on, depressing its associated
l
LED ON = Restricted outgoing calls.
key will turn it off and vice versa. LEDs may be
l
Each CO key/LED represents itself-that
turned off and on until the desired pattern IS set.
is, if LED 01 is on, then the station being
programmed (XX) is restricted from outgo-
ing calls on COl, etc.
5) Depress the m key to place new data in
All station 13/l 7 LEDs (except 19) go off.
memory.
6A) Return to Step 2 in order to continue with
this program
6B) Go to Step 2 in'an:ther program table
. or .
6C) Transfer data into working memory per Par-
agraph 02.06.
SET LED goes off.
Station 13/l 7 LED 19 goes off.
New data is stored, previous data is erased.
NOTE.
For multiple station programming, refer to Paragraph 02.10.
-83-