Table of Contents
Advertisement
Chapter 4 Tutorials
Type http://zyxelrouter.dyndns.org and press [Enter].
2
The P-660HN-F1A's login page should appear. You can then log into the P-660HN-
3
F1A and manage it.
4.6 Configuring Static Route for Routing to
Another Network
In order to extend your Intranet and control traffic flowing directions, you may
connect a router to the P-660HN-F1A's LAN. The router may be used to separate
two department networks. This tutorial shows how to configure a static routing
rule for two network routings.
In the following figure, router R is connected to the P-660HN-F1A's LAN. R
connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If
you want to send traffic from computer A (in N1 network) to computer B (in N2
network), the traffic is sent to the P-660HN-F1A's WAN default gateway by
default. In this case, B will never receive the traffic.
N1
68
A
R
N2
B
P-660HN-F1A User's Guide
Advertisement
Table of Contents
