Table of Contents
Advertisement
Chapter 7 LAN Setup
7.3 The DHCP Setup Screen
Use this screen to configure the DNS server information that the P-660HN-F1A
sends to the DHCP client devices on the LAN. Click Network > DHCP Setup to
open this screen.
Figure 41 Network > LAN > DHCP Setup
The following table describes the labels in this screen.
Table 27 Network > LAN > DHCP Setup
LABEL
DHCP Setup
DHCP
IP Pool Starting
Address
Pool Size
Remote DHCP
Server
DNS Server
DNS Servers
Assigned by DHCP
Server
132
DESCRIPTION
If set to Server, your P-660HN-F1A can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows NT and
other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the P-660HN-F1A acts as a surrogate DHCP server
and relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP
address pool.
This field specifies the size, or count of the IP address pool.
If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
The P-660HN-F1A passes a DNS (Domain Name System) server IP
address to the DHCP clients.
P-660HN-F1A User's Guide
Advertisement
Table of Contents
