ZyXEL Communications P-660HN-F1A User Manual page 38

802.11n wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HN-F1A:
Table of Contents

Advertisement

Chapter 3 Status Screens
Each field is described in the following table.
Table 4 Status Screen
LABEL
Refresh Interval Select how often you want the P-660HN-F1A to update this screen.
Apply
Device Information
Host Name
Model
Number
MAC
Address
ZyNOS
Firmware
Version
DSL
Firmware
Version
WAN Information
DSL Mode
IP Address
IP Subnet
Mask
Default
Gateway
VPI/VCI
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN Information
38
DESCRIPTION
Click this to update this screen immediately.
This field displays the P-660HN-F1A system name. It is used for
identification. You can change this in the Maintenance > System >
General screen's System Name field.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your P-660HN-F1A.
This is the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the
screen where you can change it.
This is the current version of the device's DSL modem code.
This is the DSL standard that your P-660HN-F1A is using.
This is the current IP address of the P-660HN-F1A in the WAN. Click this
to go to the screen where you can change it.
This is the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This is the Virtual Path Identifier and Virtual Channel Identifier that you
entered in the wizard or WAN screen.
This is the current IP address of the P-660HN-F1A in the LAN. Click this
to go to the screen where you can change it.
This is the current subnet mask in the LAN.
This field displays what DHCP services the P-660HN-F1A is providing to
the LAN. Choices are:
Server - The P-660HN-F1A is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The P-660HN-F1A acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The P-660HN-F1A is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
P-660HN-F1A User's Guide

Advertisement

Table of Contents
loading

Table of Contents