P-660Hn-F1A Access And Login - ZyXEL Communications P-660HN-F1A User Manual

802.11n wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HN-F1A:
Table of Contents

Advertisement

Chapter 24 Troubleshooting
Check the hardware connections.
2
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Turn the P-660HN-F1A off and on.
4
If the problem continues, contact the vendor.
5

24.2 P-660HN-F1A Access and Login

I forgot the IP address for the P-660HN-F1A.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the P-660HN-F1A by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the P-660HN-F1A (it depends on the network), so enter this IP address
in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
Section 1.6 on page
I forgot the password.
The default admin password is 1234, and the default user password is user.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 1.6 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
340
27.
27.
P-660HN-F1A User's Guide

Advertisement

Table of Contents
loading

Table of Contents