Table of Contents
Advertisement
Chapter 21 Logs
The following table describes the fields in this screen.
Table 94 Maintenance > Logs > Log Settings
LABEL
E-mail Log Settings
Mail Server
Mail Subject
Send Log to
Send Alerts to
Log Schedule
Day for
Sending Log
Time for
Sending Log
Clear log after
sending mail
Syslog
Logging
Active
Syslog IP
Address
Log Facility
Active Log and Alert
Log
310
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert
messages will not be sent via E-mail.
Type a title that you want to be in the subject line of the log e-mail
message that the P-660HN-F1A sends. Not all P-660HN-F1A models have
this field.
The P-660HN-F1A sends logs to the e-mail address specified in this field.
If this field is left blank, the P-660HN-F1A does not send logs via e-mail.
Alerts are real-time notifications that are sent as soon as an event, such
as a DoS attack, system error, or forbidden web access attempt occurs.
Enter the E-mail address where the alert messages will be sent. Alerts
include system errors, attacks and attempted access to blocked web
sites. If this field is left blank, alert messages will not be sent via E-mail.
This drop-down menu is used to configure the frequency of log messages
being sent as E-mail:
•
Daily
•
Weekly
•
Hourly
•
When Log is Full
•
None.
If you select Weekly or Daily, specify a time of day when the E-mail
should be sent. If you select Weekly, then also specify which day of the
week the E-mail should be sent. If you select When Log is Full, an alert
is sent when the log fills up. If you select None, no log messages are
sent.
Use the drop down list box to select which day of the week to send the
logs.
Enter the time of the day in 24-hour format (for example 23:00 equals
11:00 pm) to send the logs.
Select the checkbox to delete all the logs after the P-660HN-F1A sends
an E-mail of the logs.
The P-660HN-F1A sends a log to an external syslog server.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Select a location from the drop down list box. The log facility allows you
to log the messages to different files in the syslog server. Refer to the
syslog server manual for more information.
Select the categories of logs that you want to record.
P-660HN-F1A User's Guide
Advertisement
Table of Contents
