Static Route; Chapter 14 Static Route; Overview; What You Can Do In The Static Route Screens - ZyXEL Communications P-660HN-F1A User Manual

C
H A P T E R

14.1 Overview

The P-660HN-F1A usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660HN-F1A send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660HN-
F1A's LAN interface. The P-660HN-F1A routes most traffic from A to the Internet
through the P-660HN-F1A's default gateway (R1). You create one static route to
connect to services offered by your ISP behind router R2. You create another
static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 100 Example of Static Routing Topology
A
R3

14.1.1 What You Can Do in the Static Route Screens

Use the Static Route screens
IP static routes on the P-660HN-F1A.
P-660HN-F1A User's Guide
LAN
WAN
(Section 14.2 on page
14

Static Route

R1
R2
238) to view and configure
237