ZyXEL Communications P-660HN-F1A User Manual page 131

802.11n wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HN-F1A:
Table of Contents

Advertisement

Table 26 Network > LAN > IP: Advanced Setup
LABEL
Windows
Networking
(NetBIOS over
TCP/IP)
Allow between
LAN and WAN
Packet Filter
Incoming Filter
Sets
Protocol Filter
Generic Filter
Outgoing Filter
Sets
Protocol Filter
Generic Filter
Back
Apply
Cancel
P-660HN-F1A User's Guide
DESCRIPTION
NetBIOS (Network Basic Input/Output System) are TCP or UDP
packets that enable a computer to connect to and communicate with
a LAN. For some dial-up services such as PPPoE or PPTP, NetBIOS
packets cause unwanted calls. However it may sometimes be
necessary to allow NetBIOS packets to pass through to the WAN in
order to find a computer on the WAN.
Select this check box to forward NetBIOS packets from the LAN to the
WAN and from the WAN to the LAN. If your firewall is enabled with
the default policy set to block WAN to LAN traffic, you also need to
enable the default WAN to LAN firewall rule that forwards NetBIOS
traffic.
Clear this check box to block all NetBIOS packets going from the LAN
to the WAN and from the WAN to the LAN.
Select the protocol filter(s) to control incoming traffic. You may
choose up to 4 sets of filters.
You can configure packet filters in the Packet Filter screen. See
Chapter 12 on page 217
Select the generic filter(s) to control incoming traffic. You may choose
up to 4 sets of filters.
You can configure generic filters in the Packet Filter screen. See
Chapter 12 on page 217
Select the protocol filter(s) to control outgoing traffic. You may
choose up to 4 sets of filters.
You can configure protocol filters in the Packet Filter screen. See
Chapter 12 on page 217
Select the generic filter(s) to control outgoing traffic. You may choose
up to 4 sets of filters.
You can configure generic filters in the Packet Filter screen. See
Chapter 12 on page 217
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
for more details.
for more details.
for more details.
for more details.
Chapter 7 LAN Setup
131

Advertisement

Table of Contents
loading

Table of Contents