Chapter 12 Packet Filter
12.2 The Packet Filter Screen
Use this screen to set up packet filters on your P-660HN-F1A. Click Security >
Packet Filter to display the following screen.
Figure 88 Security > Packet Filter
The following table describes the labels in this screen.
Table 61 Security > Packet Filter
LABEL
#
Name
Filter Type
Modify
Apply
Cancel
218
DESCRIPTION
This field displays the index number of the filter set.
Enter a name for the filter set. The text may consist of up to 16
letters, numerals and any printable character found on a typical
English language keyboard.
Select Protocol Filter or Generic Filter for your filter set.
Protocol filter rules are used to filter IP packets while generic filter
rules allow filtering of non-IP packets.
Click the Edit icon to configure a filter set. For a new filter set, you
must enter a name for the filter set and then click Edit to configure it.
Click the Remove icon to delete a filter set.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-F1A User's Guide