Removing The Dimm Air Baffle - IBM System x3750 M4 Type 8722 Installation And Service Manual

Removing the DIMM air baffle

To remove the DIMM air baffle, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii and
2. Turn off the server (see "Turning off the server" on page 21) and all attached
3. Remove the top cover (see "Removing the server top cover" on page 36).
4. Lift the DIMM air baffle from the server and set it aside.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 116.
38
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
"Installation guidelines" on page 33.
peripheral devices. Disconnect all power cords; then, disconnect all external
cables from the server.
Attention: For proper cooling and airflow, replace the air baffle before you
turn on the server. Operating the server with the air baffle removed might
damage server components.
DIMM air baffle