816f0108-0a02ffff • 816f010d-0400ffff
816f0108-0a02ffff
[PowerSupplyElementName] has returned to OK status.
Explanation: IMM has detected that Power Supply 2 has returned to a normal operational status.
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0087
SNMP Trap ID: 4
Automatically notify Support: No
User response: Information only; no action is required.
816f010c-2581ffff
Uncorrectable error recovery detected for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Explanation: IMM has detected a recovery from an uncorrectable memory error.
Severity: Info
Alert Category: Critical - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0139
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f010d-0400ffff
The [NumericSensorElementName] has been enabled.
Explanation: The previously disabled drive 0 has been enabled.
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
587
Appendix D. Integrated management module II (IMM2) error messages