Connecting The Cables - IBM System x3750 M4 Type 8722 Installation And Service Manual

2. Align the cover over the server (toward the rear of the server) until the cover
3. Slide the cover toward the front of the server until the cover starts to engage on

Connecting the cables

The following illustration shows the locations of the input and output connectors
on the front of the server.
The following illustration shows the locations of the input and output connectors
on the rear of the server.
120
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
edges slip into position over the chassis.
the server; then, press down on the cover release latch until it clicks into place.
Cover release
latch
Top cover