IBM System x3750 M4 Type 8722 Installation And Service Manual page 433

80070114-2201ffff Sensor [SensorElementName] has transitioned from normal to non-critical state.
Explanation: Trusted Platform Module (TPM) event has transitioned to non critical state.
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
80070201-0301ffff Sensor [SensorElementName] has transitioned to critical from a less severe state.
Explanation: IMM has detected a CPU 1 temperature Sensor has transitioned to critical.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80070201-0302ffff Sensor [SensorElementName] has transitioned to critical from a less severe state.
Explanation: IMM has detected a CPU 2 temperature Sensor has transitioned to critical.
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Check the IMM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80070114-2201ffff • 80070201-0302ffff
Appendix D. Integrated management module II (IMM2) error messages
417