Table of Contents
Advertisement
User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
7.2 Camera
Configure the properties of the camera.
1. Press left/right buttons [
2. The camera channel option is highlighted and the camera settings are displayed.
3. The menus are displayed with options on the left-hand column and settings in the right
hand column.
Depending on your "category" selection, either "grid" or "tune" is displayed with the following
setting options:
Grid:
Motion level:
The motion level of each camera can be adjusted by pressing buttons [ - ] and [ + ].
Default setting is 10.
Motion grid:
o The sensitivity can be set from 1 (low) to 20 (high). Default setting is 10
o The respective function is highlighted. The motion can be monitored in the display
window. Default settin is OFF.
Privacy mask:
o To be in line with privacy regulations, you may cover (mask) certain areas by a
rectangle in the picture (live picture, recording and playback).
o Default setting is OFF.
o Press the down button on the recorder front panel or on the remote control to call
up the "privacy mask" function. The grid is displayed.
o Right-click on the
Select all. Press [Enter] or [ + - ] to select.
Clear all. Press [Enter] or [ + - ] to select.
Select specific. Press [Enter] or [ + - ] to select.
_________________________________________________________________________________
] or the number button to select the desired camera.
icon.
To define the motion grid or the privacy mask cell-by-cell, do
the following:
On the front panel or remote control, press any of direction
buttons to highlight a cell in the motion detection area, and
then press [ +] . This area is selected and the cells are
highlighted in red.
- 47 -
Advertisement
Table of Contents
