Setup; Display; General - Santec SanStore 4/8/16LMX User Manual

7. SETUP

7.1 Display

7.1.1 General

The menus are displayed with options on the left-hand column and settings in the right hand
column. A cursor (highlighted menu) can be moved using the direction buttons [
You can change the below options using the [ - + ] buttons.
ITEM
STATUS BAR
CAMERA INFO
BORDER LINE
BACKGROUND
OSD ALIGNMNET
SPLIT MODE
To save the changes and exit the menu, press the [MENU] button.
To exit the menu without saving the changes, press the [CANCEL] button.
_________________________________________________________________________________
Select "show" or "hide" to define whether the below status bar should be
displayed on the main monitor or not.
Select on-screen-display information for the camera number and title.
Select the colour of the board lines between the different cameras:
Grey, white, blue, black, dark grey.
Select the background colour in case of NO VIDEO status, i.e. when no
video is running.
Grey, white, blue, black, dark grey.
The main video output can be displayed on a VGA or on an analogue
monitor. The video can be displayed on both monitor simultaneously.
Select the on-screen-display coordinates on the monitor.
- Under scan: optimised display on CCTV monitors
- Over scan: optimised display on VGA monitors
Monitor display according to your selection done in SPLIT MODE.
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
ADJUSTMENT
- 44 -
User manual
] .