Zooming - Santec SanStore 4/8/16LMX User Manual

5.4. Zooming

During live view mode, it is possible to zoom into a section of the screen to get a close-up
view of the screen.
1. To activate the digital zoom, select the full screen display of the camera you wish to
zoom.
2. Then press the [ZOOM] button on remote control. A zoom area box pops up, as
shown below: x2
3. Move the box to the desired position using the direction buttons.
4. Press the [CANCEL] button to return normal mode.
Note:
This function is only available in live-mode.
If the zoom button is pressed while in a multiscreen display, zoom operation is not
activated.
_________________________________________________________________________________
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
x2
- 40 -
User manual