Table of Contents
Advertisement
User manual
SanStore 4/8/16LMX / SanStore 4/8/16MMX / SanStore 8/16HMX
Change the below options using the [ - + ] buttons on the remote control.
The following system events can be used:
Control:
Manual control for relay output and buzzer.
4.
Buzzer
Use:
o ON: The buzzer sounds if an alarm is triggered. The buzzer will sound for the
duration of the record time. This buzzer is connected to the alarm output.
Please configure the alarm output to "ON" to activate the alarm buzzer.
o OFF: Disables the alarm buzzer function.
Inactive:
Turn off the buzzer.
o Event (automatic): The buzzer is turned off when the event has finished.
o Manual: The buzzer can be controlled by this menu <Control>.
5.
To save changes and exit the menu, press the [MENU] button.
To exit the menu without making changes, press the [CANCEL] button.
_________________________________________________________________________________
HDD disk failure
Record system failure
Temperature warning.
Fan lock warning
Voltage warning
Low RTC battery warning
External device event
Network link disconnected
Admin login
Power recovery
Disk full
Invalid password in sequence
Auxiliary event (reserved)
- 77 -
Advertisement
Table of Contents
