Xerox DocuColor 12 System Administration Manual page 89

4
Grasp the Developer Waste Container with your
right hand. Pull the Developer Waste Container
completely out of the copier/printer, as illustrated
in Figure 21.
5
Remove the gold cap from the front of the used
Developer Waste Container, as illustrated in
Figure 22.
6
Securely push the gold cap over the opening on
the back of the waste container, as illustrated in
Figure 23, to prevent developer beads from
spilling out.
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
Figure 21: Removing the old
Developer Waste Container
Figure 22: Removing the cap
Figure 23: Placing the cap on
4–13
the waste container
MAINTENANCE
1
2
3
4
5
6
7