Replacing The Developer Waste Container - Xerox DocuColor 12 System Administration Manual

1
When a message is displayed to replace a
Developer Waste Container, follow the instructions
provided on this page in addition to those on the
labels surrounding the Developer Waste
Container and affixed to the copier/printer.
CAUTION:To prevent developer spillage, remove
the Developer Waste Container only when the
2
"Developer Waste Container is Full" message
appears on the Touch Screen.
1
Open the Front Door of the copier/printer.
3
2
Place a few sheets of paper on the floor under the
Developer Waste Container to catch any
developer that may spill.
3
Locate the Developer Waste container (area C in
Figure 20).
4
5
6
7
MAINTENANCE

Replacing the Developer Waste Container

Figure 20: Locating the old
Developer Waste Container
4–12 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE