Creating A Network Policy; Modifying A Network Policy - Symbol WS5000 Series System Reference Manual

6.1.6 Modifying a Network Policy

To modify an existing network policy:
1. From the WS5000 Series Switch GUI main window, select Modify > Network > Existing Policy. The
system launches the Network Policy Manager.
Figure 6.18 Modifying an Existing Network Policy—Network Policy Manager
2. This panel lists all available Network Policies configured on the system.
and options within this panel. To edit a policy, select the policy name in the left pane first.
Table 6.5 Network Policy Manager Fields and Controls
Field or Control Description
Name Name of the selected Network Policy.
Description Description of the selected Network Policy, if available.
Input Policy Tree view of the Classification Groups and Classifiers in the Input policy for the selected
Network Policy.
Output Policy Tree view of the Classification Groups and Classifiers in the Output policy for the selected
Network Policy.
Properties Displays information about the selected Input Policy, Output Policy, Classification Group
or Classifier, depending on what is selected/highlighted in the tree.
Create Launches the Network Policy Wizard to create a new Network Policy. See
Network Policy on page 6-13
Delete Removes the selected policy from the system. A dialogue appears to confirm this action.
Edit Opens a variation of the Network Policy Wizard, for editing it in the same fashion that it
was created. See
Close Closes the Network Policy Manager without saving any changes.
for more details.
Creating a Network Policy on page 6-13
6-15
Configuring Policies
Table 6.5 describes the fields
Creating a
for more details.