Removing An Adapter - IBM System x3250 4364 Problem Determination And Service Manual

Removing an adapter

To remove a PCI Express adapter, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Remove the server from the rack; then, remove the cover (see "Removing the
4. Disconnect any cables from the adapter.
5. Grasp the riser-card assembly at the rear edge and lift to remove it from the
30
IBM System x3250 Types 4364, 4365, and 4366: Problem Determination and Service Guide
Expansion-slot
bracket
on page 25.
all external cables.
cover" on page 28).
server.
Riser-card
assembly
Adapter
Adapter support
bracket
Expansion slot 1
Riser-card
assembly
Expansion slot 2