IBM System x3250 4364 Problem Determination And Service Manual page 125

Hide thumbs Also See for System x3250 4364:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 4364, 4365, or 4366 server," on page 15 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
System-event/error log message
LAN: Ethernet interface is no longer active
LAN: Ethernet interface is now active
LAN: Telnet tamper triggered. Possible break-in
attempt
LAN: Web Server tamper delay triggered.
Possible break-in attempt
No ISMP gateway defined for the interconnect
network. RSA x is assuming the gateway
OS Watchdog response enabled by x
OS Watchdog response disabled by x
PFA Alert, see preceding error in system error
log.
Possible ASM reset occurred --- reason
unknown
Power off
Power on
PPP_1: Client connected at nnnn bps
PPP_1: User requested to abort PPP interface
PPP[xxx] PPP-Cfg, Local-
IP@=aaa.aaa.aaa.aaa, Remote-
IP@=bbb.bbb.bbb.bbb NetMsk=ccc.ccc.ccc.ccc,
Auth=ddd
Received alert from system x; type: y,
sender's ID: z
Remote access attempt failed
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from TELNET
client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from WEB
browser at IP@=xxx.xxx.xxx.xxx
Remote login successful. Login ID: 'x' from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Retry count exceeded. Incorrect password
entered too many times for userid x
RSA x became the ISMP gateway
RS485 broadcast from x ignored; more than y
devices present on the RS485 network
Action
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only. See the preceding entry in the system-error log.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
107
Chapter 5. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x3250 4365System x32504366

Table of Contents