IBM System x3250 4364 Problem Determination And Service Manual page 117

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 4364, 4365, or 4366 server," on page 15 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
035-275-001 Adapter Communication error.
035-276-001 Adapter CPU test error.
035-277-001 Adapter Local RAM test error.
035-278-001 Adapter NVSRAM test error.
035-279-001 Adapter Cache test error.
035-280-001 Adapter Drive test error.
035-281-001 Adapter Drive error.
035-282-001 Adapter Parameters set error.
035-283-001 Adapter Battery error.
035-xxx-cnn c = ServeRAID channel number, nn = ID of
failing fixed disk drive.
Action
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
Replace the attached drive.
Replace the attached drive.
1. Update the RAID controller firmware on the RAID
adapter (see "Updating the firmware" on page
11).
2. Reseat the RAID adapter.
3. Replace the RAID adapter.
Replace the battery module on the RAID adapter.
1. Check the system-error logs and replace any
indicated failing devices.
Note: A FRU must be replaced by a trained
service technician only.
2. Reseat the hard disk drive on channel C, ID nn.
3. Replace the hard disk drive on channel C, ID nn.
99
Chapter 5. Diagnostics