Configuring Dhcp Global Relay; Figure 99 Ip Application > Dhcp > Global; Table 68 Relay Agent Information; Table 69 Ip Application > Dhcp > Global - ZyXEL Communications ONU-2024 Series User Manual

Table of Contents

Advertisement

The following describes the DHCP relay information that the ONU sends to the DHCP server:

Table 68 Relay Agent Information

FIELD LABELS
Slot ID
Port ID
VLAN ID
Information

25.3.2 Configuring DHCP Global Relay

Configure global DHCP relay in the DHCP Relay screen. Click IP Application > DHCP in
the navigation panel and click the Global link to display the screen as shown.
Figure 99 IP Application > DHCP > Global
The following table describes the labels in this screen.
Table 69 IP Application > DHCP > Global
LABEL
Active
Remote
DHCP Server
1 .. 3
Relay Agent
Information
Information
Apply
Cancel
25.3.2.1 Global DHCP Relay Configuration Example
The follow figure shows a network example where the ONU is used to relay DHCP requests
for the VLAN1 and VLAN2 domains. There is only one DHCP server that services the DHCP
clients in both domains.
ONU User's Guide
DESCRIPTION
(1 byte) This value is always 0 for stand-alone switches.
(1 byte) This is the port that the DHCP client is connected to.
(2 bytes) This is the VLAN that the port belongs to.
(up to 32 bytes) This optional, read-only field is set according
to system name set in Basic Settings > General Setup.
DESCRIPTION
Select this check box to enable DHCP relay.
Enter the IP address of a DHCP server in dotted decimal notation.
Select the Option 82 check box to have the ONU add information (slot number, port
number and VLAN ID) to client DHCP requests that it relays to a DHCP server.
This read-only field displays the system name you configure in the General Setup
screen.
Select the check box for the ONU to add the system name to the client DHCP
requests that it relays to a DHCP server.
Click Apply to save your changes to the ONU's run-time memory. The ONU loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 25 DHCP
187

Advertisement

Table of Contents
loading

Table of Contents