5.2
Configuring a Filter Set
To configure a filter sets, follow this procedure:
Step 1.
Enter 21 from the Main Menu to open Menu 21 - Filter Set Configuration.
Filter
Set #
Comments
------
------------------
1
test
2
______________
3
______________
4
______________
5
6
Step 2.
Enter the index of the filter set you wish to configure (no. 1-12) and press [Enter]
Step 3.
Enter a descriptive name or comment in the Edit Comments field and press Enter.
Step 4.
Press [Enter] at the message: [Press ENTER to confirm] to open Menu 21.1 - Filter Rules
Summary.
SNMP Configuration
Menu 21 - Filter Set Configuration
Filter
Set #
------
7
8
9
10
11
12
Enter Filter Set Number to Configure=
Edit Comments= NetBIOS_WAN
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 5-2 Menu 21 - Filter Set Configuration
Prestige 642 ADSL Modem
Comments
------------------
______________
______________
______________
______________
______________
______________
.
5-3