Table of Contents
Advertisement
20.1.4 TACACS+ Server Setup
Use this screen to configure your TACACS+ server settings. See
more information on TACACS+ servers. Click on the TACACS+ Server Setup link in the
Authentication and Accounting screen to view the screen as shown.
Figure 77 Advanced Application > Auth and Acct > TACACS+ Server Setup
The following table describes the labels in this screen.
Table 48 Advanced Application > Auth and Acct > TACACS+ Server Setup
LABEL
Authentication
Server
Mode
Timeout
Index
ONU User's Guide
DESCRIPTION
Use this section to configure your TACACS+ authentication settings.
This field is only valid if you configure multiple TACACS+ servers.
Select index-priority and the ONU tries to authenticate with the first configured
TACACS+ server, if the TACACS+ server does not respond then the ONU tries to
authenticate with the second TACACS+ server.
Select round-robin to alternate between the TACACS+ servers that it sends
authentication requests to.
Specify the amount of time in seconds that the ONU waits for an authentication
request response from the TACACS+ server.
If you are using index-priority for your authentication and you are using two
TACACS+ servers then the timeout value is divided between the two TACACS+
servers. For example, if you set the timeout value to 30 seconds, then the ONU
waits for a response from the first TACACS+ server for 15 seconds and then tries
the second TACACS+ server.
This is a read-only number representing a TACACS+ server entry.
Chapter 20 Authentication & Accounting
Section on page 146
for
149
Advertisement
Table of Contents
