Table 17 Advanced Application > Vlan > Vlan Port Setting - ZyXEL Communications ONU-2024 Series User Manual

Table of Contents

Advertisement

Chapter 8 VLAN
The following table describes the labels in this screen.
Table 17 Advanced Application > VLAN > VLAN Port Setting
LABEL
GVRP
Port Isolation
Ingress Check
Port
*
PVID
GVRP
Acceptable
Frame Type
VLAN Trunking
Apply
Cancel
86
DESCRIPTION
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a
way for switches to register necessary VLAN members on ports across the
network.
Select this check box to permit VLAN groups beyond the local ONU.
Port Isolation allows each port to communicate only with the CPU management
port and the Gigabit uplink ports but not communicate with each other. This option
is the most limiting but also the most secure.
Select this check box to activate ingress filtering on the ONU.
Clear this check box to disable ingress filtering the ONU.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Enter a number between 1and 4094 as the port VLAN ID.
Select this check box to allow GVRP on this port.
Specify the type of frames allowed on a port. Choices are All and Tag Only.
Select All from the drop-down list box to accept all untagged or tagged frames on
this port. This is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames
will be dropped.
Enable VLAN Trunking on ports connected to other switches or routers (but not
ports directly connected to end users) to allow frames belonging to unknown VLAN
groups to pass through the ONU.
Click Apply to save your changes to the ONU's run-time memory. The ONU loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Click Cancel to begin configuring this screen afresh.
ONU User's Guide

Advertisement

Table of Contents
loading

Table of Contents