3.4
Wake on LAN Selection (Reserved) (JP1)
The PCM-5821 provides Wake-on LAN function when ATX power is used.
To enable Wake-on LAN function, the JP1 should be set as shown below:
Table 3-3: Wake-on LAN selection (JP1)
* default setting
3.5
CMOS Clear (JP2)
Warning:
Table3-4: Clear CMOS/External RTC (JP2)
* default setting
3.6
Watchdog Timer Configuration
An onboard watch timer reduces the chance of disruptions which EMP
(electromagnetic pulse) interference can cause. This is an invaluable protec-
tive device for standalone or unmanned applications. Setup involves one
jumper and running the control software. (Refer to Appendix A.)
*Normal Power
1
2
4
3
5
6
To avoid damaging the computer, always turn off the power
supply before setting "Clear CMOS". Set the jumper back
to "Normal operation" before turning on the power supply.
*Normal operation
1
3
5
Chapter 3 The Engine of PPC-A84T (PCM-5821)
Wake-on LAN
1
2
4
3
5
6
Clear CMOS
1
3
5
41