Table of Contents
Advertisement
3.4 Wake on LAN Selection (Reserved) (JP1)
The PCM-5821 provides Wake-on LAN function when ATX power is
used. To enable Wake-on LAN function, the JP1 should be set as
shown below:
Table 3-3: Wake-on LAN selection (JP1)
* default setting
3.5 CMOS Clear (JP2)
Warning:
Table3-4: Clear CMOS/External RTC (JP2)
* default setting
3.6 Watchdog Timer Configuration
An onboard watch timer reduces the chance of disruptions which EMP
(electromagnetic pulse) interference can cause. This is an invaluable
protective device for standalone or unmanned applications. Setup
involves one jumper and running the control software. (Refer to
Appendix A.)
*Normal Power
1
2
4
3
5
6
To avoid damaging the computer, always turn off the
power supply before setting "Clear CMOS". Set the
jumper back to "Normal operation" before turning on
the power supply.
*Normal operation
1
3
5
Wake-on LAN
1
3
5
Clear CMOS
1
Chapter 3 The Engine of PPC-A84/A120
2
4
6
3
5
43
Advertisement
Table of Contents
