Advantech PPC-A84 User Manual page 107

Ns gxm processor-based panel pc with 8.4" lcd flat panel display
Hide thumbs Also See for PPC-A84:
Table of Contents

Advertisement

T T T T T ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)
ypematic Rate (Chars/Sec)
Sets the rate of a character repeat when the key is held down.
The options are: 6 (Default), 8, 10, 12, 15, 20, 24, 30.
T T T T T ypematic Delay (msec)
ypematic Delay (msec)
ypematic Delay (msec)
ypematic Delay (msec)
ypematic Delay (msec)
Sets the delay time before a character is repeated.
The options are: 250 (Default), 500, 750, 1000 milliseconds.
Security Option
Security Option
Security Option
Security Option
Security Option
Allows you to set the security level of the system.
The options are: Setup (Default), System.
PCI/VGA Palette Snoop
PCI/VGA Palette Snoop
PCI/VGA Palette Snoop
PCI/VGA Palette Snoop
PCI/VGA Palette Snoop
When enabled, allows you to install an enhanced graphics adapter card. If
your graphics adapter card does not support the Palette Snoop function, set at
"Disabled" to avoid system malfunctions.
The options are: Disabled (Default), Enabled.
OS Select For DRAM > 64MB
OS Select For DRAM > 64MB
OS Select For DRAM > 64MB
OS Select For DRAM > 64MB
OS Select For DRAM > 64MB
If your operating system (OS) is OS2, select "OS2". Otherwise, stay with the
default setting Non-OS2.
V V V V V ideo BIOS Shadow
ideo BIOS Shadow
ideo BIOS Shadow
ideo BIOS Shadow
ideo BIOS Shadow
When enabled, allows the BIOS to copy the video ROM code of the add-on
video card to the system memory, giving faster access.
The options are: Enabled (Default), Disabled.
C8000-CBFFF Shadow thr
C8000-CBFFF Shadow thr
C8000-CBFFF Shadow through to DC000-DFFFF Shadow
C8000-CBFFF Shadow thr
C8000-CBFFF Shadow thr
When enabled, allows the BIOS to copy the BIOS ROM code of the add-on
card to the system memory for faster access. It may improve the performance
of the add-on card. Some add-on cards will not function properly if their
BIOS ROM codes are shadowed. To use this option correctly, you need to
know the memory address range used by the BIOS ROM of each add-on
card.The options are: Disabled (Default), Enabled.
ough to DC000-DFFFF Shadow
ough to DC000-DFFFF Shadow
ough to DC000-DFFFF Shadow
ough to DC000-DFFFF Shadow
Chapter 8
Award BIOS Setup
93

Advertisement

Table of Contents
loading

Table of Contents